How To Paste

Hi!
Hope you bought a Wall Decals from us and thinking HOW TO PASTE?
Here you go.... The below easy steps will guide you how to put your Wall Decals into your wall. Before you start understand the Series of Wall Stickers you bought. The series and design number will be printed near to the name in the invoice you received. Or else you can find it in our website on the page that you bought near by the name of the decals. For example if you have bought "Photo Tree Wall Decal [Big Size] - 196cm X 135cm - AY 803" that "AY" is the series of your Wall Sticker and "803" is the design number. Hope you have understood about the series and design number. Okay let's start.
We have seven series of Wall Sticker

1. AY Series and JM Series (both are same) (Preset Series)
These series stickers will have two layers. i) Actual Wall Sticker printed on clear transparent vinyl. ii) Back Up Paper which is holding the Wall Stickers.
Step 1. Calculate the approximate size of the Wall Sticker (you can get the size from the website page where you bought) and fix the wall where you are going to paste it.
Step 2. See the screen shot image in the Wall Sticker itself. That gives you the idea that how your wall sticker will look after pasting. Also analyze which part should be pasted first and which part is last.
Step 3. Clean the wall
Step 4. Release the Wall Sticker from the Backing Paper and paste it.
Step 5. Squeeze well with your hands or a Credit Card and Enjoy the WOW Effect of Your Walls.
2. CS Series (Custom Sticker Series)
These series Decals will have three layers. i) Transparent release sheet used for releasing purpose. ii) Actual Wall Decals in color you ordered. iii) Back Up Paper which is holding the Wall Decals.
Step 1. Calculate the approximate size of the Wall Sticker (you can get the size from the website page where you bought) and fix the wall where you are going to paste it.
Step 2. See the output image from the website page you bought. That gives you the idea that how your wall sticker will look after pasting. Also analyze which part should be pasted first and which part is last. Sometimes you may receive the design as a single sheet. So you don’t worry about first and last just fix it as a single piece.
Step 3. Clean the wall
Step 4. Gently remove the transparent release sheet along with the Wall Decals from the back up paper. You will be taking off the first two layers i) Release Sheet and ii) Wall Decals out from the third layer.
Step 5. Paste the Wall Decals along with the Release Sheet to your walls.
Step 6. Be careful in this stage that you have to Squeeze well with your hands or a Credit Card only on the part of your decals which you put in the wall. Don’t squeeze on all sides in the transparent film because it will stick into the wall nicely and it will be hard to remove.
Step 7. Gently remove the transparent film from the wall leaving the Wall Decals in the Wall. If the decals also comes together then stop re-paste it and squeeze nicely only on the decal part and again remove only the releasing transparent sheet and Enjoy the WOW Effect Of Your Walls.
3. CL Series (Clear Sheet Stickers Series)
These series stickers will have two layers. i) Actual Wall Sticker printed on clear transparent vinyl. ii) Back Up Paper which is holding the Wall Stickers.
Step 1. Calculate the approximate size of the Wall Sticker (you can get the size from the website page where you bought) and fix the wall where you are going to paste it.
Step 2. See the image from the sheet you received. That gives you the idea that how your wall sticker will look after pasting.
Step 3. Clean the wall
Step 4. Release the Wall Sticker from the Backing Paper and paste it..
Step 5. Squeeze well with your hands or a Credit Card and Enjoy the WOW Effect of Your Walls.
Step 6. Don’t try to remove the transparent sheet because the design itself is printed on that and it cannot be removed. Your decals will have a transparent film sheet background which is somewhat visible.
4. WM Series (Wall Mural Series)
These series stickers will have two layers. i) Actual Crystal Clear Quality Wall Murals printed on sheet . ii) Back Up Paper which is holding the Wall Murals.
Step 1. Calculate the approximate size of the Wall Murals (you can get the size from the website page where you bought) and fix the wall where you are going to paste it.
Step 2. See the image from the sheet you received. That gives you the idea that how your wall sticker will look after pasting.
Step 3. Clean the wall
Step 4. Release the Wall Mural from the Backing Paper and paste it.
Step 5. Squeeze well with your hands or a Credit Card and Enjoy the WOW Effect of Your Walls.
5. RD Series (Radium Sticker Series)
These series Decals will have two separate sheets sometimes it also comes as a single sheet. It will have three layers. i) Transparent release sheet used for releasing purpose. ii) Actual Wall Decals or Radium Wall Decals you ordered. iii) Back Up Paper which is holding the Wall Decals.
If you have received two sheets i) One sheet will have Radium Stickers and ii) Other will have normal stickers follow 2 Sheet Process.
If you have received one sheet i) One sheet will have Radium Stickers follow 1 Sheet Process.
1 Sheet Process :
Step 1. Calculate the approximate size of the Wall Sticker (you can get the size from the website page where you bought) and fix the wall where you are going to paste it.
Step 2. See the output image from the website page you bought. That gives you the idea that how your wall sticker will look after pasting. Also analyze which part should be pasted first and which part is last. Sometimes you may receive the design as a single sheet. So you don’t worry about first and last just fix it as a single piece.
Step 3. Clean the wall
Step 4. Gently remove the transparent release sheet along with the Wall Decals from the back up paper. You will be taking off the first two layers i) Release Sheet and ii) Wall Decals out from the third layer.
Step 5. Paste the Wall Decals along with the Release Sheet to your walls.
Step 6. Be careful in this stage that you have to Squeeze well with your hands or a Credit Card only on the part of your decals which you put in the wall. Don’t squeeze on all sides in the transparent film because it will stick into the wall nicely and it will be hard to remove.
Step 7. Gently remove the transparent film from the wall leaving the Wall Decals in the Wall. If the decals also comes together then stop re-paste it and squeeze nicely only on the decal part and again remove only the releasing transparent sheet and Enjoy the WOW Effect Of Your Walls.
2 Sheet Process :
It is same as the 1 Sheet process. You would have received two sheets i) One sheet will have Radium Stickers and ii) Other will have normal stickers
Step 1. Fix the normal stickers using the 1 Sheet procedures.
Step 2. Secondly fix the Radium Stickers using the 1 Sheet procedure and Enjoy the WOW Effect Of Your Walls.
Please note the Radium Stickers will absorb lights at least for five hours and only after that it glows in the dark.
6. MA Series (Modern Art Series)
Step 1. Select the Wall in which you want to hang your Modern Art.
Step 2. Hang you modern art and Enjoy the WOW Effect Of Your Walls.
7. SC Series (Sticker Clock Series)
These series Decals will have three layers.
i) Transparent release sheet used for releasing purpose. ii) Actual Wall Decals in color you ordered. iii) Back Up Paper which is holding the Wall Decals and a Working Mechanical Clock fixed in a Round Box with a double side tape. As a corporate policy, as per Government Norms and also as per the Rules of our Shipping Partners we will not provide batteries since it may explode while transit.

Step 1. Calculate the approximate size of the Wall Sticker Clock (you can get the size from the website page where you bought) and fix the wall where you are going to paste it.
Step 2. See the output image from the website page you bought. That gives you the idea that how your wall sticker clock will look after pasting. Also analyze which part should be pasted first and which part is last. Sometimes you may receive the design as a single sheet. So you don’t worry about first and last just fix it as a single piece.
Step 3. Clean the wall
Step 4. Gently remove the transparent release sheet along with the Wall Sticker Clock from the back up paper. You will be taking off the first two layers i) Release Sheet and ii) Wall Sticker Clock out from the third layer.
Step 5. Paste the Wall Sticker Clock along with the Release Sheet to your walls.
Step 6. Be careful in this stage that you have to Squeeze well with your hands or a Credit Card only on the part of your Sticker Clock which you put in the wall. Don’t squeeze on all sides in the transparent film because it will stick into the wall nicely and it will be hard to remove.
Step 7. Gently remove the transparent film from the wall leaving the Sticker Clock in the Wall. If the decals also comes together then stop re-paste it and squeeze nicely only on the decal part and again remove only the releasing transparent sheet.
Step 8. Buy batteries and put into the clock, gently fix the arms and set the correct time.
Step 9. Release the double side tape and paste one side on the back side of your Clock and paste the other side on the sticker clock design and Enjoy the WOW Effect Of Your Walls.